Back to back brewing control solution featuring the highest quality, US made stainless steel enclosure with the thickest walls of any, and high quality hardware throughout the inside. Electric Brewing Supply's EBSP200 series PIDs on the front provide a clear and accurate measure insuring a smooth brew day.  Increase your success with repeatability and accuracy unmatched by any smaller setup. 

This particular controller is designed to provide power for 2 elements simultaneously, for what is commonly referred to as back to back brewing. Control 2 pumps while also having a spare auxiliary outlet for whatever extra you may need such as a cell charger or 3rd pump.

Trust your system to last for you, while also knowing that the hardware is industrial standard, making for fast and easy repairs in case something does happen.

Built using the highest quality parts that we have come to rely on from trusted manufactures such as ABB, Phoenix Contact, and many more.

Quickly mount it using an industry standard TV mount, VESA 200 spec.  No more searching for the right piece of wood or metal channel.  Quickly mount it to your wall and set it to brew.

Don't forget to check out the recommended accessories tab for frequently added items.

The kit includes:

Basic Kit Hardware

• 6 - LEDs (2 white 220v, 2 yellow 110v, 1 red 110v, and 1 green 220v)
• 1 - Alarm Buzzer LED
• 1 - Emergency Stop locking push button with NC Contact
• 2 - 2-Way Switches with NO Contacts for element (on-off)
• 2 - 2-Way Switches with NO Contacts for pumps (on-off)
• 3 - 2-Way Toggle style Blue LED Switches with NO/NC Contacts for pumps (on-off)
• 1 - 2-Way Switches with NO Contacts for alarms (on-off) 
• 1 - Additional NO Contacts for back of emergency stop
• 4 - Additional NC Contacts for back of 2-way switches
• 1 - Key toggle Switch for panel on/off
• 1 - General Purpose Ice Cube Style Relay for safe power up
• 3 - 63a DIN Contactors w/ 110v Coils for main power and for element control
• 2 - 40a Solid State Relays for elements
• 1 – Large (US made) pre-drilled and tapped heat sink for element SSRs
• 1 meter of DIN rail cut in 1/3m increments
• Phoenix Contact Terminal Blocks for wire from 6-24 awg
• 2 - UL-Listed 32a 2 pole DIN Rail Breaker
• 1 - UL-Listed 6a 1 pole DIN Rail Breaker
• Phoenix Contact Terminal Block clip style anchoring ends
• Phoenix Contact Terminal Block end covers
• Terminal bridge jumpers

Enclosure and outlets

• 1 – Enclosure (pre-cut US-Made stainless steel)
• 2 – L6-30 Flanged outlets for elements
• 2 – L5-15 Flanged outlets for pumps
• 1 - 5-15 Auxilary side mount outlet
• 1 – C6375 flanged inlet for main power supply
• 3 – XLR Male pre-wired and solderd connectors for temperature input
• Tags for panel include:
  • Power / Off-On
  • Alarm / Off-On
  • Stop
  • Boil Element / Off-On
  • HLT Element / Off-On
  • Water Pump / Off-On
  • Wort Pump / Off-On
  • 2 x HLT
  • 2 x Boil
  • Mash
  • Water Pump
  • Wort Pump
  • HLT Probe
  • MASH Probe
  • Boil Probe
  • 240v / 50a
  • 120v / 6a
  • Reset
  • Start

PID Temp controller, PID Timer and temperature probes

• 3 - EBSP200 (SSR Output) PID Temperature control units
• 1 - EBST200 PID Timer unit
• 3 - 1/2 inch MPT x 1-1/2 inch RTD100 Temperature Probes
• 3 – XLR to QC Silicon temperature probe cables

Wiring and wire fittings

• 6 ft Range style main power cable with 14-50 end
• Black 6 gauge wire
• Black 10 gauge wire
• Red 10 gauge wire
• Green 10 gauge wire
• Black 14 gauge wire
• Red 14 gauge
• White 14 gauge wire
• Yellow 14 gauge wire
• Orange 14 gauge wire
• Blue 14 gauge wire
• Purple 14 gauge wire
• Pink 14 gauge wire
• Red 18 gauge wire
• Yellow 18 gauge wire
• Orange 18 gauge wire
• White 18 gauge wire
• 10 - #10 Yellow Spade connectors for 10ga wire connections on SSR relays
• 100 - #6 Blue Spade Connectors for most 110v wiring throughout the panel
• 50 - #6 Red spade connectors for the low voltage and temp probe wiring
• 5 - #10 Blue ring connectors for grounding wire on enclosure posts
• Approx. 50 Nylon Adhesive Back Cable tie bases (zip tie base)
• Nylon cable ties (1/8" x 4.1")

 Package also includes a printed copy of our wiring guide.

Tools you will need include:

• Wire Cutters
• Wire strippers
• Crimping tools for spade and ring connectors
• Phillips screw driver(s)
• Flat head screw driver(s)

Important note, while we are a UL control panel shop, these kits cannot be UL Listed only products we expressly build and state as such on our site are UL listed. This is especially important to note for those intending to use this for commercial purposes within the US or in Canada.

Videos

Panel Specs

All panel kits are assembled by Electric Brewing Supply, in Chassell, Michigan from globally sourced parts.

• Complete Wiring Guide (2018 REV)
• Complete Wiring Guide (2022 Rev) COMING SOON
• Specific Wiring Schematic for 2018 Rev (30"x24" plotter sized) 
• Specific Wiring Schematic for May 2021 to current (30"x24" plotter sized)
• Getting Started Manual
• EBSP200 Temperature Controller Manual
• EBST200 Timer Manual