$8 flat-rate shipping on $49, Ships FREE over $49.

Home Page

Sort by:
{"id":11884773455,"title":"30a PID Control Panel, 2 elements","handle":"30a-pid-control-panel-2-elements","description":"\u003cklarna-placement data-id=\"c95c6bbf-2521-4162-a3f2-6d4a4315ab65\" data-purchase_amount=\"\"\u003e\u003c\/klarna-placement\u003e\n\u003ch4\u003e\n\u003cem\u003eFor US and most Central and North American brewers.\u003c\/em\u003e \u003c\/h4\u003e\n\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 30a Control panel, ready to be mounted on the wall and plugged in.\u003c\/p\u003e\n\u003cp\u003eProtects your elements from accidental firing while brewing with a selector switch controlling which element is controlled.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003eEach panel features an interlocking relay, for safety from accidental power up of elements or dry pumping. When the e-stop or key switch are turned on, this relay reacts by either shutting off power to the pumps and elements (therefore appear dead) or it allows power to flow. Additionally, this relay works in conjunction with the e-stop switch, and therefore, protects the hardware even while still leaving you the ability to take corrective action on the still powered PIDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black\/white tags\u003c\/li\u003e\n\u003cli\u003e30a, 240v electric, single phase (for safety, please use GFCI protection)\u003c\/li\u003e\n\u003cli\u003e30a Twist lock power in supply to plain wire end or 4 prong washer\/dryer plug, 6 ft wire\u003c\/li\u003e\n\u003cli\u003eElectric Brewing Supply 200 Series\u003cspan\u003e \u003c\/span\u003ePID Controllers,\u003cspan\u003e \u003c\/span\u003ewith matching \u003cspan\u003e200 Series PID Timer unit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 L6-30 Flanged outlets for 240v Elements upto 5500w\u003c\/li\u003e\n\u003cli\u003e2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March\u003c\/li\u003e\n\u003cli\u003e3 temperature probe inputs via XLR connection\u003c\/li\u003e\n\u003cli\u003e3 RTD temp probe cables, color coded.\u003c\/li\u003e\n\u003cli\u003e3 RTD 1.5\" long temperature probes with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003c\/li\u003e\n\u003cli\u003e30a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps, we recommend pairing the L5-15 to 5-15 molded extension cord with your pumps to keep your warranty in tact.  They can be found \u003ca href=\"http:\/\/www.ebrewsupply.com\/pump-jumper-6-l5-15p-to-5-15r\/\"\u003ehere\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eKettles to your liking\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAverage lead is approx \u003cstrong\u003e3-5 days\u003c\/strong\u003e, during busier seasons this can stretch further.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","published_at":"2017-08-21T19:15:54-04:00","created_at":"2017-08-21T19:15:57-04:00","vendor":"Electric Brewing Supply Products","type":"Parts \u0026 More,Featured-Products,Turn Key Setups,PID Control Panels,Control Panel Combo","tags":["30a Control Panels","PID Controlled"],"price":145400,"price_min":145400,"price_max":158000,"available":true,"price_varies":true,"compare_at_price":145400,"compare_at_price_min":145400,"compare_at_price_max":158000,"compare_at_price_varies":true,"variants":[{"id":48556080399,"title":"NPT Probe \/ NPT Probe \/ NPT Probe","option1":"NPT Probe","option2":"NPT Probe","option3":"NPT Probe","sku":"asb-pid-0322-a","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - NPT Probe \/ NPT Probe \/ NPT Probe","public_title":"NPT Probe \/ NPT Probe \/ NPT Probe","options":["NPT Probe","NPT Probe","NPT Probe"],"price":155000,"weight":20412,"compare_at_price":155000,"inventory_quantity":-256,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556080463,"title":"NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","option1":"NPT Probe","option2":"NPT Probe","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0322-b","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","options":["NPT Probe","NPT Probe","1.5 Tri-Clamp Probe (add $10)"],"price":156000,"weight":20412,"compare_at_price":156000,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556080527,"title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","option1":"NPT Probe","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"NPT Probe","sku":"asb-pid-0322-c","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","public_title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","options":["NPT Probe","1.5 Tri-Clamp Probe (add $10)","NPT Probe"],"price":156000,"weight":20412,"compare_at_price":156000,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556080591,"title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","option1":"NPT Probe","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0322-d","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","options":["NPT Probe","1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)"],"price":157000,"weight":20412,"compare_at_price":157000,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556080655,"title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"NPT Probe","option3":"NPT Probe","sku":"asb-pid-0322-e","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","public_title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","options":["1.5 Tri-Clamp Probe (add $10)","NPT Probe","NPT Probe"],"price":156000,"weight":20412,"compare_at_price":156000,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556080719,"title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"NPT Probe","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0322-f","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)","NPT Probe","1.5 Tri-Clamp Probe (add $10)"],"price":157000,"weight":20412,"compare_at_price":157000,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556080783,"title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"NPT Probe","sku":"asb-pid-0322-g","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","public_title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","options":["1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)","NPT Probe"],"price":157000,"weight":20412,"compare_at_price":157000,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556080847,"title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0322-h","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)"],"price":158000,"weight":20412,"compare_at_price":158000,"inventory_quantity":-44,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":13617503174746,"title":"None (-$32) \/ None (-$32) \/ None (-$32)","option1":"None (-$32)","option2":"None (-$32)","option3":"None (-$32)","sku":"asb-pid-0322","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID Control Panel, 2 elements - None (-$32) \/ None (-$32) \/ None (-$32)","public_title":"None (-$32) \/ None (-$32) \/ None (-$32)","options":["None (-$32)","None (-$32)","None (-$32)"],"price":145400,"weight":20412,"compare_at_price":145400,"inventory_quantity":-60,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/30a-2element.jpg?v=1537796674","\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/cec6750954f683e4de4edc47570c332e.jpg?v=1537796674"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/30a-2element.jpg?v=1537796674","options":["HLT Probe","Mash Probe","Boil Probe"],"content":"\u003cklarna-placement data-id=\"c95c6bbf-2521-4162-a3f2-6d4a4315ab65\" data-purchase_amount=\"\"\u003e\u003c\/klarna-placement\u003e\n\u003ch4\u003e\n\u003cem\u003eFor US and most Central and North American brewers.\u003c\/em\u003e \u003c\/h4\u003e\n\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 30a Control panel, ready to be mounted on the wall and plugged in.\u003c\/p\u003e\n\u003cp\u003eProtects your elements from accidental firing while brewing with a selector switch controlling which element is controlled.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003eEach panel features an interlocking relay, for safety from accidental power up of elements or dry pumping. When the e-stop or key switch are turned on, this relay reacts by either shutting off power to the pumps and elements (therefore appear dead) or it allows power to flow. Additionally, this relay works in conjunction with the e-stop switch, and therefore, protects the hardware even while still leaving you the ability to take corrective action on the still powered PIDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black\/white tags\u003c\/li\u003e\n\u003cli\u003e30a, 240v electric, single phase (for safety, please use GFCI protection)\u003c\/li\u003e\n\u003cli\u003e30a Twist lock power in supply to plain wire end or 4 prong washer\/dryer plug, 6 ft wire\u003c\/li\u003e\n\u003cli\u003eElectric Brewing Supply 200 Series\u003cspan\u003e \u003c\/span\u003ePID Controllers,\u003cspan\u003e \u003c\/span\u003ewith matching \u003cspan\u003e200 Series PID Timer unit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 L6-30 Flanged outlets for 240v Elements upto 5500w\u003c\/li\u003e\n\u003cli\u003e2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March\u003c\/li\u003e\n\u003cli\u003e3 temperature probe inputs via XLR connection\u003c\/li\u003e\n\u003cli\u003e3 RTD temp probe cables, color coded.\u003c\/li\u003e\n\u003cli\u003e3 RTD 1.5\" long temperature probes with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003c\/li\u003e\n\u003cli\u003e30a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps, we recommend pairing the L5-15 to 5-15 molded extension cord with your pumps to keep your warranty in tact.  They can be found \u003ca href=\"http:\/\/www.ebrewsupply.com\/pump-jumper-6-l5-15p-to-5-15r\/\"\u003ehere\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eKettles to your liking\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAverage lead is approx \u003cstrong\u003e3-5 days\u003c\/strong\u003e, during busier seasons this can stretch further.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e"}
30a PID Control Panel, 2 elements

30a PID Control Panel, 2 elements

For US and most Central and North American brewers.  Hit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery. Electric Brewing Supply does the work so you don't have to. Featuring a fully configured 30a Control panel, ready to be mou...


More Info
{"id":1587667468378,"title":"360 Series 50a 2-element 3v Control Panel","handle":"x-series-50a-2-element-3v-control-panel","description":"\u003cp\u003e Introducing the all new Electric Brewing Supply Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else. \u003c\/p\u003e\n\u003cp\u003eCentral control for all your brewery, no longer just your brew house.  Add central control to your fermentation control, with heat and cooling available for each fermentation vessel.  For the series, add valve control, or for those going out into the nano world, build an automated keg washer.\u003c\/p\u003e\n\u003cp\u003eIt's so much more then just a touch screen or just a web interface. It is in fact BOTH.  For the brewer who wants hands on in the brewery, we feature the 4\" Water tight (NEMA 4x for those curious) touch screen display. Giving you full access to all your brewery controls. The touch screen allows you to brew independent of any internet or network connection.\u003c\/p\u003e\n\u003cp\u003eWant the remote control and management of a connected device? With it's built in web interface, the reach extends beyond the control panel to any web browser you choose.  With an active scale design, the interface should work on most any web browser. (*Web ux is coming with next firmware release, slated first or second week of January)\u003c\/p\u003e\n\u003cp\u003eContinuing in our past foot steps, we went to our US suppliers and found a smoking awesome truly solid NEMA 4x Stainless steel enclosure to house everything made in Ohio.  Combined with the touch screen front from Indiana and internals from EU and China; all to give you a solid, reliable control panel.\u003c\/p\u003e\n\u003cp\u003eWith RTD Pt100 temperature input, no longer are you tied to proprietary or difficult to source temperature probes; pick your favorite RTD probes from our catalog and fit them into your system to your liking.  The controller includes 3 probes of your choosing with our standard 12 ft silicon insulated temp cables.\u003c\/p\u003e\n\u003cp\u003eGrowing? Take this one with you, or check out our larger options based on the same control software.  Stop having to learn how to use multiple controllers and stick with one solid solution.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e50a twist lock inlet with 6ft molded power cord (with 14-50 plug on end)\u003c\/p\u003e\n\u003cp\u003ePeak power rating of 2x 5500w elements and 2x Chugger pumps*\u003c\/p\u003e\n\u003cp\u003eIndustry standard L6-30 twist lock plugs on the underside for your elements\u003c\/p\u003e\n\u003cp\u003eIndustry standard L5-15 twist lock plugs for your pumps\u003c\/p\u003e\n\u003cp\u003eOur standard 3-pin XLR temp probe connections \u003c\/p\u003e\n\u003cp\u003eCat6 connectivity to your local network or network extender\u003c\/p\u003e\n\u003cp\u003eCat6 expansion port of valve controller and other future releases\u003c\/p\u003e\n\u003cp\u003eEnclosure is 304 Stainless steel, 380mm x 380mm x 210mm\u003c\/p\u003e\n\u003cp\u003eAssembled and Tested in Chassell, Michigan, USA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTypical lead time is 1-2 weeks depending on the time of year and back log.\u003c\/p\u003e","published_at":"2018-12-02T13:11:19-05:00","created_at":"2018-12-02T13:11:19-05:00","vendor":"Electric Brewing Supply","type":"360 Series","tags":["50a","remote manage","touch screen"],"price":210400,"price_min":210400,"price_max":223000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15801862455386,"title":"3 NPT Probes","option1":"3 NPT Probes","option2":null,"option3":null,"sku":"360-0522-nnn","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 50a 2-element 3v Control Panel - 3 NPT Probes","public_title":"3 NPT Probes","options":["3 NPT Probes"],"price":220000,"weight":22680,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"continue","barcode":""},{"id":15801890734170,"title":"2 NPT Probes with 1 Tri-Clamp","option1":"2 NPT Probes with 1 Tri-Clamp","option2":null,"option3":null,"sku":"360-0522-nnt","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 50a 2-element 3v Control Panel - 2 NPT Probes with 1 Tri-Clamp","public_title":"2 NPT Probes with 1 Tri-Clamp","options":["2 NPT Probes with 1 Tri-Clamp"],"price":221000,"weight":22680,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":""},{"id":15801890766938,"title":"1 NPT Probes with 2 Tri-Clamp","option1":"1 NPT Probes with 2 Tri-Clamp","option2":null,"option3":null,"sku":"360-0522-ntt","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 50a 2-element 3v Control Panel - 1 NPT Probes with 2 Tri-Clamp","public_title":"1 NPT Probes with 2 Tri-Clamp","options":["1 NPT Probes with 2 Tri-Clamp"],"price":222000,"weight":22680,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"continue","barcode":""},{"id":15801890799706,"title":"3 Tri-Clamp","option1":"3 Tri-Clamp","option2":null,"option3":null,"sku":"360-0522-ttt","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 50a 2-element 3v Control Panel - 3 Tri-Clamp","public_title":"3 Tri-Clamp","options":["3 Tri-Clamp"],"price":223000,"weight":22680,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":""},{"id":15801890832474,"title":"No probes","option1":"No probes","option2":null,"option3":null,"sku":"360-0522","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 50a 2-element 3v Control Panel - No probes","public_title":"No probes","options":["No probes"],"price":210400,"weight":22680,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a_front_w_probes_take2_c.jpg?v=1561647216","\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a_front_w_probes_comp.jpg?v=1561647216","\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/IMG_20181130_160536.jpg?v=1561647216"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a_front_w_probes_take2_c.jpg?v=1561647216","options":["Probe Combo"],"content":"\u003cp\u003e Introducing the all new Electric Brewing Supply Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else. \u003c\/p\u003e\n\u003cp\u003eCentral control for all your brewery, no longer just your brew house.  Add central control to your fermentation control, with heat and cooling available for each fermentation vessel.  For the series, add valve control, or for those going out into the nano world, build an automated keg washer.\u003c\/p\u003e\n\u003cp\u003eIt's so much more then just a touch screen or just a web interface. It is in fact BOTH.  For the brewer who wants hands on in the brewery, we feature the 4\" Water tight (NEMA 4x for those curious) touch screen display. Giving you full access to all your brewery controls. The touch screen allows you to brew independent of any internet or network connection.\u003c\/p\u003e\n\u003cp\u003eWant the remote control and management of a connected device? With it's built in web interface, the reach extends beyond the control panel to any web browser you choose.  With an active scale design, the interface should work on most any web browser. (*Web ux is coming with next firmware release, slated first or second week of January)\u003c\/p\u003e\n\u003cp\u003eContinuing in our past foot steps, we went to our US suppliers and found a smoking awesome truly solid NEMA 4x Stainless steel enclosure to house everything made in Ohio.  Combined with the touch screen front from Indiana and internals from EU and China; all to give you a solid, reliable control panel.\u003c\/p\u003e\n\u003cp\u003eWith RTD Pt100 temperature input, no longer are you tied to proprietary or difficult to source temperature probes; pick your favorite RTD probes from our catalog and fit them into your system to your liking.  The controller includes 3 probes of your choosing with our standard 12 ft silicon insulated temp cables.\u003c\/p\u003e\n\u003cp\u003eGrowing? Take this one with you, or check out our larger options based on the same control software.  Stop having to learn how to use multiple controllers and stick with one solid solution.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e50a twist lock inlet with 6ft molded power cord (with 14-50 plug on end)\u003c\/p\u003e\n\u003cp\u003ePeak power rating of 2x 5500w elements and 2x Chugger pumps*\u003c\/p\u003e\n\u003cp\u003eIndustry standard L6-30 twist lock plugs on the underside for your elements\u003c\/p\u003e\n\u003cp\u003eIndustry standard L5-15 twist lock plugs for your pumps\u003c\/p\u003e\n\u003cp\u003eOur standard 3-pin XLR temp probe connections \u003c\/p\u003e\n\u003cp\u003eCat6 connectivity to your local network or network extender\u003c\/p\u003e\n\u003cp\u003eCat6 expansion port of valve controller and other future releases\u003c\/p\u003e\n\u003cp\u003eEnclosure is 304 Stainless steel, 380mm x 380mm x 210mm\u003c\/p\u003e\n\u003cp\u003eAssembled and Tested in Chassell, Michigan, USA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTypical lead time is 1-2 weeks depending on the time of year and back log.\u003c\/p\u003e"}
360 Series 50a 2-element 3v Control Panel

360 Series 50a 2-element 3v Control Panel

 Introducing the all new Electric Brewing Supply Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else.  Central control for all your brewery, no longer just your brew house.  Add central control to your fermentatio...


More Info
{"id":1616083026010,"title":"360 Series 3v, 2 Element Control, UL Listed","handle":"360-series-3v-2-element-control-ul","description":"\u003cp\u003e Introducing the all new Electric Brewing Supply UL Listed Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else. \u003c\/p\u003e\n\u003cp\u003eCentral control for all your brewery, no longer just your brew house.  Add central control to your fermentation control, with heat and cooling available for each fermentation vessel.  For the series, add valve control, or for those going out into the nano world, build an automated keg washer.\u003c\/p\u003e\n\u003cp\u003eIt's so much more then just a touch screen or just a web interface. It is in fact BOTH.  For the brewer who wants hands on in the brewery, we feature the 4\" Water tight (NEMA 4x for those curious) touch screen display. Giving you full access to all your brewery controls. The touch screen allows you to brew independent of any internet or network connection.\u003c\/p\u003e\n\u003cp\u003eWant the remote control and management of a connected device? With it's built in web interface, the reach extends beyond the control panel to any web browser you choose.  With an active scale design, the interface should work on most any web browser. (*Web ux is coming with next firmware release, slated first or second week of January)\u003c\/p\u003e\n\u003cp\u003eContinuing in our past foot steps, we went to our US suppliers and found a smoking awesome truly solid NEMA 4x Stainless steel enclosure to house everything made in Ohio.  Combined with the touch screen front from Indiana and internals from EU and China; all to give you a solid, reliable control panel.\u003c\/p\u003e\n\u003cp\u003eWith RTD Pt100 temperature input, no longer are you tied to proprietary or difficult to source temperature probes; pick your favorite RTD probes from our catalog and fit them into your system to your liking.  The controller includes 3 probes of your choosing with our standard 12 ft silicon insulated temp cables.\u003c\/p\u003e\n\u003cp\u003eGrowing? Take this one with you, or check out our larger options based on the same control software.  Stop having to learn how to use multiple controllers and stick with one solid solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePower to supplied by customer installed cable or conduit.\u003c\/p\u003e\n\u003cp\u003ePeak power rating of 2x 5500w elements and 2x Chugger brewer pumps\u003c\/p\u003e\n\u003cp\u003eIndustry standard L6-30 twist lock plugs on the underside for your elements\u003c\/p\u003e\n\u003cp\u003eIndustry standard L5-15 twist lock plugs for your pumps\u003c\/p\u003e\n\u003cp\u003eOur standard 3-pin XLR temp probe connections \u003c\/p\u003e\n\u003cp\u003eCat6 connectivity to your local network or network extender\u003c\/p\u003e\n\u003cp\u003eCat6 expansion port of valve controller and other future releases\u003c\/p\u003e\n\u003cp\u003eEnclosure is 304 Stainless steel, 380mm x 380mm x 210mm\u003c\/p\u003e\n\u003cp\u003eAssembled and Tested in Chassell, Michigan, USA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndividually UL\/cUL listed control for US and Canadian use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTypical lead time is 1-2 weeks depending on the time of year and back log.\u003c\/p\u003e","published_at":"2019-01-03T13:39:21-05:00","created_at":"2019-01-03T13:39:21-05:00","vendor":"Electric Brewing Supply","type":"360 Series","tags":["30a","50a"],"price":250400,"price_min":250400,"price_max":263000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15899700297818,"title":"3 NPT Probes","option1":"3 NPT Probes","option2":null,"option3":null,"sku":"360-0522-2e-2p-ul-nnn","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 3v, 2 Element Control, UL Listed - 3 NPT Probes","public_title":"3 NPT Probes","options":["3 NPT Probes"],"price":260000,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":""},{"id":15899705475162,"title":"2 NPT Probes with 1 Tri-Clamp","option1":"2 NPT Probes with 1 Tri-Clamp","option2":null,"option3":null,"sku":"360-0522-2e-2p-ul-nnt","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 3v, 2 Element Control, UL Listed - 2 NPT Probes with 1 Tri-Clamp","public_title":"2 NPT Probes with 1 Tri-Clamp","options":["2 NPT Probes with 1 Tri-Clamp"],"price":261000,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":""},{"id":15899705507930,"title":"1 NPT Probes with 2 Tri-Clamp","option1":"1 NPT Probes with 2 Tri-Clamp","option2":null,"option3":null,"sku":"360-0522-2e-2p-ul-ntt","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 3v, 2 Element Control, UL Listed - 1 NPT Probes with 2 Tri-Clamp","public_title":"1 NPT Probes with 2 Tri-Clamp","options":["1 NPT Probes with 2 Tri-Clamp"],"price":262000,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":""},{"id":15899705540698,"title":"3 Tri-Clamp","option1":"3 Tri-Clamp","option2":null,"option3":null,"sku":"360-0522-2e-2p-ul-ttt","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 3v, 2 Element Control, UL Listed - 3 Tri-Clamp","public_title":"3 Tri-Clamp","options":["3 Tri-Clamp"],"price":263000,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":""},{"id":15899705573466,"title":"No Probes","option1":"No Probes","option2":null,"option3":null,"sku":"360-0522-2e-2p-ul","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 3v, 2 Element Control, UL Listed - No Probes","public_title":"No Probes","options":["No Probes"],"price":250400,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a_front_w_probes_comp_1331dbc7-169c-4460-a354-60d3e2589d08.jpg?v=1546540806"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a_front_w_probes_comp_1331dbc7-169c-4460-a354-60d3e2589d08.jpg?v=1546540806","options":["Probe Combo"],"content":"\u003cp\u003e Introducing the all new Electric Brewing Supply UL Listed Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else. \u003c\/p\u003e\n\u003cp\u003eCentral control for all your brewery, no longer just your brew house.  Add central control to your fermentation control, with heat and cooling available for each fermentation vessel.  For the series, add valve control, or for those going out into the nano world, build an automated keg washer.\u003c\/p\u003e\n\u003cp\u003eIt's so much more then just a touch screen or just a web interface. It is in fact BOTH.  For the brewer who wants hands on in the brewery, we feature the 4\" Water tight (NEMA 4x for those curious) touch screen display. Giving you full access to all your brewery controls. The touch screen allows you to brew independent of any internet or network connection.\u003c\/p\u003e\n\u003cp\u003eWant the remote control and management of a connected device? With it's built in web interface, the reach extends beyond the control panel to any web browser you choose.  With an active scale design, the interface should work on most any web browser. (*Web ux is coming with next firmware release, slated first or second week of January)\u003c\/p\u003e\n\u003cp\u003eContinuing in our past foot steps, we went to our US suppliers and found a smoking awesome truly solid NEMA 4x Stainless steel enclosure to house everything made in Ohio.  Combined with the touch screen front from Indiana and internals from EU and China; all to give you a solid, reliable control panel.\u003c\/p\u003e\n\u003cp\u003eWith RTD Pt100 temperature input, no longer are you tied to proprietary or difficult to source temperature probes; pick your favorite RTD probes from our catalog and fit them into your system to your liking.  The controller includes 3 probes of your choosing with our standard 12 ft silicon insulated temp cables.\u003c\/p\u003e\n\u003cp\u003eGrowing? Take this one with you, or check out our larger options based on the same control software.  Stop having to learn how to use multiple controllers and stick with one solid solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePower to supplied by customer installed cable or conduit.\u003c\/p\u003e\n\u003cp\u003ePeak power rating of 2x 5500w elements and 2x Chugger brewer pumps\u003c\/p\u003e\n\u003cp\u003eIndustry standard L6-30 twist lock plugs on the underside for your elements\u003c\/p\u003e\n\u003cp\u003eIndustry standard L5-15 twist lock plugs for your pumps\u003c\/p\u003e\n\u003cp\u003eOur standard 3-pin XLR temp probe connections \u003c\/p\u003e\n\u003cp\u003eCat6 connectivity to your local network or network extender\u003c\/p\u003e\n\u003cp\u003eCat6 expansion port of valve controller and other future releases\u003c\/p\u003e\n\u003cp\u003eEnclosure is 304 Stainless steel, 380mm x 380mm x 210mm\u003c\/p\u003e\n\u003cp\u003eAssembled and Tested in Chassell, Michigan, USA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndividually UL\/cUL listed control for US and Canadian use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTypical lead time is 1-2 weeks depending on the time of year and back log.\u003c\/p\u003e"}
360 Series 3v, 2 Element Control, UL Listed

360 Series 3v, 2 Element Control, UL Listed

 Introducing the all new Electric Brewing Supply UL Listed Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else.  Central control for all your brewery, no longer just your brew house.  Add central control to your f...


More Info
{"id":11884774543,"title":"50a PID Control Panel, 2 elements","handle":"50a-pid-control-panel-2-elements","description":"\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/files\/asLow98_large.png?v=1524402401\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch4\u003eAverage lead is approx 1-2 weeks, during busier seasons this can stretch further.\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 50a Control panel, ready to be mounted on the wall and plugged in.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003eEach panel features an interlocking relay, for safety from accidental power up of elements or dry pumping. When the e-stop or key switch are turned on, this relay reacts by either shutting off power to the pumps and elements (therefore appear dead) or it allows power to flow. Additionally, this relay works in conjunction with the e-stop switch, and therefore, protects the hardware even while still leaving you the ability to take corrective action on the still powered PIDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black\/white tags\u003c\/li\u003e\n\u003cli\u003e50a, 240v electric, single phase (for safety, please use 60a GFCI protection)\u003c\/li\u003e\n\u003cli\u003e50a Twist lock power in supply to plain wire end or 4 prong range plug (Nema 14-50), 6 ft wire\u003c\/li\u003e\n\u003cli\u003eElectric Brewing Supply 200 Series PID Controllers, with\u003cem\u003e \u003c\/em\u003ematching \u003cspan\u003e200 Series PID Timer unit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 L6-30 Flanged outlets for 240v Elements upto 5500w\u003c\/li\u003e\n\u003cli\u003e2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March\u003c\/li\u003e\n\u003cli\u003e3 temperature probe inputs via XLR connection\u003c\/li\u003e\n\u003cli\u003e3 RTD temp probe cables, Color coded.\u003c\/li\u003e\n\u003cli\u003e3 RTD 1.5\" long temperature probes with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eAvailable here\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e60a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps, we recommend pairing the L5-15 to 5-15 molded extension cord with your pumps to keep your warranty in tact.  They can be found\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.ebrewsupply.com\/pump-jumper-6-l5-15p-to-5-15r\/\"\u003ehere\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMore regarding the PID Units\u003c\/h3\u003e\n\u003cp\u003eThe compact Series 16C Temperature Controller offers accurate temperature measurement and control in a 1\/16 DIN package. Designed for direct or reverse acting (cooling or heating) control, the Series 16C can be programmed for simple ON\/OFF or more complex PID control functions. PID control is supported with manual or auto-tuning.\u003c\/p\u003e\n\u003cp\u003eThe Series 16C accepts a variety of thermocouple and RTD inputs. Process value and setpoint value are displayed simultaneously on the large dual LED. Auto-tuning, engineering units (°F or °C), and alarm status is also indicated on the faceplate. Two alarm outputs are included on the unit with 12 preprogrammed alarm functions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product is intended for experimental home use only. No warranty or guarantee of suitability (express or implied) is given for commercial use of this product.\u003c\/p\u003e\n\u003cp\u003eProduct warranties may be revoked if it is determined that product faults are due to misuse, abuse, or improper connection. Buyer agrees that Electric Brewing Supply, LLC shall not be liable for either specific performance or any liability, loss, tampering, abuse, damage, including consequential and incidental damages, arising out of buyer's purchase of the equipment, or any defects in the equipment.\u003c\/p\u003e","published_at":"2017-08-21T19:16:11-04:00","created_at":"2017-08-21T19:16:14-04:00","vendor":"Electric Brewing Supply","type":"Parts \u0026 More,Featured-Products,Turn Key Setups,PID Control Panels,Control Panel Combo","tags":["50a Control Panel","PID Controlled"],"price":165400,"price_min":165400,"price_max":178000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48556083471,"title":"NPT Probe \/ NPT Probe \/ NPT Probe","option1":"NPT Probe","option2":"NPT Probe","option3":"NPT Probe","sku":"asb-pid-0522-a","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - NPT Probe \/ NPT Probe \/ NPT Probe","public_title":"NPT Probe \/ NPT Probe \/ NPT Probe","options":["NPT Probe","NPT Probe","NPT Probe"],"price":175000,"weight":20412,"compare_at_price":null,"inventory_quantity":-51,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556083535,"title":"NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","option1":"NPT Probe","option2":"NPT Probe","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0522-b","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","options":["NPT Probe","NPT Probe","1.5 Tri-Clamp Probe (add $10)"],"price":176000,"weight":20412,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556083599,"title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","option1":"NPT Probe","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"NPT Probe","sku":"asb-pid-0522-c","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","public_title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","options":["NPT Probe","1.5 Tri-Clamp Probe (add $10)","NPT Probe"],"price":176000,"weight":20412,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556083663,"title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","option1":"NPT Probe","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0522-d","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","options":["NPT Probe","1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)"],"price":177000,"weight":20412,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556083727,"title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"NPT Probe","option3":"NPT Probe","sku":"asb-pid-0522-e","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","public_title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","options":["1.5 Tri-Clamp Probe (add $10)","NPT Probe","NPT Probe"],"price":176000,"weight":20865,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556083791,"title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"NPT Probe","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0522-f","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)","NPT Probe","1.5 Tri-Clamp Probe (add $10)"],"price":177000,"weight":20865,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556083855,"title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"NPT Probe","sku":"asb-pid-0522-g","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","public_title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","options":["1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)","NPT Probe"],"price":177000,"weight":20865,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556083919,"title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0522-h","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)"],"price":178000,"weight":20865,"compare_at_price":null,"inventory_quantity":-12,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":13617525063770,"title":"None ($-32) \/ None ($-32) \/ None ($-32)","option1":"None ($-32)","option2":"None ($-32)","option3":"None ($-32)","sku":"asb-pid-0522","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 2 elements - None ($-32) \/ None ($-32) \/ None ($-32)","public_title":"None ($-32) \/ None ($-32) \/ None ($-32)","options":["None ($-32)","None ($-32)","None ($-32)"],"price":165400,"weight":20412,"compare_at_price":null,"inventory_quantity":-31,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a-2element.jpg?v=1537557226","\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/a2d2acdf6b48a0f1d03805c88f697350.jpg?v=1537557226"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a-2element.jpg?v=1537557226","options":["HLT Probe","Mash Probe","Boil Probe"],"content":"\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/files\/asLow98_large.png?v=1524402401\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch4\u003eAverage lead is approx 1-2 weeks, during busier seasons this can stretch further.\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 50a Control panel, ready to be mounted on the wall and plugged in.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003eEach panel features an interlocking relay, for safety from accidental power up of elements or dry pumping. When the e-stop or key switch are turned on, this relay reacts by either shutting off power to the pumps and elements (therefore appear dead) or it allows power to flow. Additionally, this relay works in conjunction with the e-stop switch, and therefore, protects the hardware even while still leaving you the ability to take corrective action on the still powered PIDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black\/white tags\u003c\/li\u003e\n\u003cli\u003e50a, 240v electric, single phase (for safety, please use 60a GFCI protection)\u003c\/li\u003e\n\u003cli\u003e50a Twist lock power in supply to plain wire end or 4 prong range plug (Nema 14-50), 6 ft wire\u003c\/li\u003e\n\u003cli\u003eElectric Brewing Supply 200 Series PID Controllers, with\u003cem\u003e \u003c\/em\u003ematching \u003cspan\u003e200 Series PID Timer unit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 L6-30 Flanged outlets for 240v Elements upto 5500w\u003c\/li\u003e\n\u003cli\u003e2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March\u003c\/li\u003e\n\u003cli\u003e3 temperature probe inputs via XLR connection\u003c\/li\u003e\n\u003cli\u003e3 RTD temp probe cables, Color coded.\u003c\/li\u003e\n\u003cli\u003e3 RTD 1.5\" long temperature probes with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eAvailable here\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e60a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps, we recommend pairing the L5-15 to 5-15 molded extension cord with your pumps to keep your warranty in tact.  They can be found\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.ebrewsupply.com\/pump-jumper-6-l5-15p-to-5-15r\/\"\u003ehere\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMore regarding the PID Units\u003c\/h3\u003e\n\u003cp\u003eThe compact Series 16C Temperature Controller offers accurate temperature measurement and control in a 1\/16 DIN package. Designed for direct or reverse acting (cooling or heating) control, the Series 16C can be programmed for simple ON\/OFF or more complex PID control functions. PID control is supported with manual or auto-tuning.\u003c\/p\u003e\n\u003cp\u003eThe Series 16C accepts a variety of thermocouple and RTD inputs. Process value and setpoint value are displayed simultaneously on the large dual LED. Auto-tuning, engineering units (°F or °C), and alarm status is also indicated on the faceplate. Two alarm outputs are included on the unit with 12 preprogrammed alarm functions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis product is intended for experimental home use only. No warranty or guarantee of suitability (express or implied) is given for commercial use of this product.\u003c\/p\u003e\n\u003cp\u003eProduct warranties may be revoked if it is determined that product faults are due to misuse, abuse, or improper connection. Buyer agrees that Electric Brewing Supply, LLC shall not be liable for either specific performance or any liability, loss, tampering, abuse, damage, including consequential and incidental damages, arising out of buyer's purchase of the equipment, or any defects in the equipment.\u003c\/p\u003e"}
50a PID Control Panel, 2 elements

50a PID Control Panel, 2 elements

Average lead is approx 1-2 weeks, during busier seasons this can stretch further. Hit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery. Electric Brewing Supply does the work so you don't have to. Featuring a fully configured 50a Co...


More Info
{"id":11884769103,"title":"30a PID BIAB Control Panel, 1 element","handle":"30a-pid-biab-control-panel-1-element","description":"\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 30a Control panel, ready to be mounted on the wall and plugged in.\u003c\/p\u003e\n\u003cp\u003eProtects your elements from accidental firing while brewing with an element off\/on switch, shutting all power off to the element.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black\/white tags\u003c\/li\u003e\n\u003cli\u003e30a, 240v electric, single phase (for safety, please use GFCI protection)\u003c\/li\u003e\n\u003cli\u003e30a Twist lock power in supply to plain wire end or 4 prong washer\/dryer plug, 6 ft wire\u003c\/li\u003e\n\u003cli\u003eElectric Brewing's EBSP200 PID feature convenient Temp to Manual control switching for easy boil and temperature control.\u003c\/li\u003e\n\u003cli\u003e1 L6-30 Flanged outlets for 240v Elements upto 5500w\u003c\/li\u003e\n\u003cli\u003e1 L5-15 Flanged outlets for 120v for pumps such as Chugger or March\u003c\/li\u003e\n\u003cli\u003e1 temperature probe input via XLR connection\u003c\/li\u003e\n\u003cli\u003e1 RTD temp probe cable\u003c\/li\u003e\n\u003cli\u003e1 RTD 1.5\" long temperature probe with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eAvailable here\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e30a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003eWe recommend the L5-15 to 5-15 Pump jumper cable to avoid voiding your pump warranty.\u003c\/li\u003e\n\u003cli\u003eKettle to your liking\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAverage lead time of \u003cstrong\u003e3-5 days\u003c\/strong\u003e depending on current orders.  Busier times this could stretch some.\u003c\/p\u003e","published_at":"2017-08-21T19:14:46-04:00","created_at":"2017-08-21T19:14:47-04:00","vendor":"Electric Brewing Supply Products","type":"Featured-Products,Turn Key Setups,PID Control Panels,Control Panel Combo","tags":["30a Control Panels","BIAB","Brew-in-a-Bag","PID Controlled"],"price":57500,"price_min":57500,"price_max":58500,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48556064463,"title":"NPT Probe","option1":"NPT Probe","option2":null,"option3":null,"sku":"aspBIAB0311-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID BIAB Control Panel, 1 element - NPT Probe","public_title":"NPT Probe","options":["NPT Probe"],"price":57500,"weight":11340,"compare_at_price":null,"inventory_quantity":-26,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48556064527,"title":"1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":null,"option3":null,"sku":"aspBIAB0311-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"30a PID BIAB Control Panel, 1 element - 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)"],"price":58500,"weight":11340,"compare_at_price":null,"inventory_quantity":-20,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/30a-biab.jpg?v=1539263143","\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/ea497a9d59c9a084d5293d33a67464be.jpg?v=1539263143"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/30a-biab.jpg?v=1539263143","options":["Boil Probe"],"content":"\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 30a Control panel, ready to be mounted on the wall and plugged in.\u003c\/p\u003e\n\u003cp\u003eProtects your elements from accidental firing while brewing with an element off\/on switch, shutting all power off to the element.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black\/white tags\u003c\/li\u003e\n\u003cli\u003e30a, 240v electric, single phase (for safety, please use GFCI protection)\u003c\/li\u003e\n\u003cli\u003e30a Twist lock power in supply to plain wire end or 4 prong washer\/dryer plug, 6 ft wire\u003c\/li\u003e\n\u003cli\u003eElectric Brewing's EBSP200 PID feature convenient Temp to Manual control switching for easy boil and temperature control.\u003c\/li\u003e\n\u003cli\u003e1 L6-30 Flanged outlets for 240v Elements upto 5500w\u003c\/li\u003e\n\u003cli\u003e1 L5-15 Flanged outlets for 120v for pumps such as Chugger or March\u003c\/li\u003e\n\u003cli\u003e1 temperature probe input via XLR connection\u003c\/li\u003e\n\u003cli\u003e1 RTD temp probe cable\u003c\/li\u003e\n\u003cli\u003e1 RTD 1.5\" long temperature probe with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eAvailable here\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e30a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003eWe recommend the L5-15 to 5-15 Pump jumper cable to avoid voiding your pump warranty.\u003c\/li\u003e\n\u003cli\u003eKettle to your liking\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAverage lead time of \u003cstrong\u003e3-5 days\u003c\/strong\u003e depending on current orders.  Busier times this could stretch some.\u003c\/p\u003e"}
30a PID BIAB Control Panel, 1 element

30a PID BIAB Control Panel, 1 element

Hit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery. Electric Brewing Supply does the work so you don't have to. Featuring a fully configured 30a Control panel, ready to be mounted on the wall and plugged in. Protects your elements...


More Info
{"id":11885040079,"title":"50a PID Control Panel, 4 elements","handle":"50a-pid-control-panel-4-elements","description":"\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/files\/asLow100_large.png?v=1524402489\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch4\u003eAverage lead is approx 2-4 weeks, during busier seasons this can stretch to 8.\u003c\/h4\u003e\n\u003cp\u003e** Updated design effective 10\/15\/2018. All new 20x20x8 Enclosure **\u003c\/p\u003e\n\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 50a Control panel, ready to be mounted on the wall and plug in.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003eEach panel features an interlocking relay, for safety from accidental power up of elements or dry pumping. When the e-stop or key switch are turned on, this relay reacts by either shutting off power to the pumps and elements (therefore appear dead) or it allows power to flow. Additionally, this relay works in conjunction with the e-stop switch, and therefore, protects the hardware even while still leaving you the ability to take corrective action on the still powered PIDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with weather proof engraved ID tagging\u003c\/li\u003e\n\u003cli\u003e50a, 240v electric, single phase (for safety, please use GFCI protection)\u003c\/li\u003e\n\u003cli\u003e50a Twist lock power in supply to plain wire end or 4 prong washer\/dryer plug, 6 ft wire\u003c\/li\u003e\n\u003cli\u003eElectric Brewing Supply 200 Series\u003cspan\u003e \u003c\/span\u003ePID Controllers,\u003cspan\u003e \u003c\/span\u003ewith matching \u003cspan\u003e200 Series PID Timer unit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 L6-30 Flanged outlets for 240v Elements upto 5500w configured in an either HLT or Boil only selection.\u003c\/li\u003e\n\u003cli\u003e2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March\u003c\/li\u003e\n\u003cli\u003e3 temperature probe inputs via XLR connection\u003c\/li\u003e\n\u003cli\u003e3 RTD temp probe cables, color coded.\u003c\/li\u003e\n\u003cli\u003e3 RTD 1.5\" long temperature probes with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eAvailable here\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e50a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps, we recommend pairing the L5-15 to 5-15 molded extension cord with your pumps to keep your warranty intact.  They can be found \u003ca href=\"http:\/\/www.ebrewsupply.com\/pump-jumper-6-l5-15p-to-5-15r\/\"\u003ehere\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eKettles to your liking\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOverall dimensions\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof control panel measure 20 inches wide, 22 inches tall, and approximately 9 inches deep. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003c\/li\u003e\n\u003cli\u003e50a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps with plugs changed to twist locking L5-15 plug.\u003c\/li\u003e\n\u003cli\u003eKettles to your liking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower requirements for electrics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will need a NEMA 14-50 outlet on the wall for power.  The outlet should be protected by GFCI breaker for protection.  It is highly recommended for this control you use a 60a breaker with proper wiring (8 ga in areas where we've lived, 6 ga in some others). We highly recommend you consult and hire a electrician for this task.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","published_at":"2017-08-21T20:28:24-04:00","created_at":"2017-08-21T20:28:25-04:00","vendor":"Electric Brewing Supply","type":"Parts \u0026 More,Turn Key Setups","tags":["50a Control Panel","PID Controlled"],"price":230400,"price_min":230400,"price_max":243000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48557377807,"title":"NPT Probe \/ NPT Probe \/ NPT Probe","option1":"NPT Probe","option2":"NPT Probe","option3":"NPT Probe","sku":"asb-pid-0542-a","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - NPT Probe \/ NPT Probe \/ NPT Probe","public_title":"NPT Probe \/ NPT Probe \/ NPT Probe","options":["NPT Probe","NPT Probe","NPT Probe"],"price":240000,"weight":29484,"compare_at_price":null,"inventory_quantity":-86,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557377871,"title":"NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","option1":"NPT Probe","option2":"NPT Probe","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0542-b","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","options":["NPT Probe","NPT Probe","1.5 Tri-Clamp Probe (add $10)"],"price":241000,"weight":29484,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557377935,"title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","option1":"NPT Probe","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"NPT Probe","sku":"asb-pid-0542-c","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","public_title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","options":["NPT Probe","1.5 Tri-Clamp Probe (add $10)","NPT Probe"],"price":241000,"weight":29484,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557377999,"title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","option1":"NPT Probe","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0542-d","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","options":["NPT Probe","1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)"],"price":242000,"weight":29484,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557378063,"title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"NPT Probe","option3":"NPT Probe","sku":"asb-pid-0542-e","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","public_title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","options":["1.5 Tri-Clamp Probe (add $10)","NPT Probe","NPT Probe"],"price":241000,"weight":29484,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557378127,"title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"NPT Probe","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0542-f","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)","NPT Probe","1.5 Tri-Clamp Probe (add $10)"],"price":242000,"weight":29484,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557378191,"title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"NPT Probe","sku":"asb-pid-0542-g","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","public_title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","options":["1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)","NPT Probe"],"price":242000,"weight":29484,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557378255,"title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"asb-pid-0542-h","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)"],"price":243000,"weight":29484,"compare_at_price":null,"inventory_quantity":-15,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":13617531519066,"title":"None ($-32) \/ None ($-32) \/ None ($-32)","option1":"None ($-32)","option2":"None ($-32)","option3":"None ($-32)","sku":"asb-pid-0542","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"50a PID Control Panel, 4 elements - None ($-32) \/ None ($-32) \/ None ($-32)","public_title":"None ($-32) \/ None ($-32) \/ None ($-32)","options":["None ($-32)","None ($-32)","None ($-32)"],"price":230400,"weight":29484,"compare_at_price":null,"inventory_quantity":-24,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a-4element.jpg?v=1539787874","\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/PID_50a_4ele_EBSP2.jpg?v=1539787874"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/50a-4element.jpg?v=1539787874","options":["HLT Probe","Mash Probe","Boil Probe"],"content":"\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/files\/asLow100_large.png?v=1524402489\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch4\u003eAverage lead is approx 2-4 weeks, during busier seasons this can stretch to 8.\u003c\/h4\u003e\n\u003cp\u003e** Updated design effective 10\/15\/2018. All new 20x20x8 Enclosure **\u003c\/p\u003e\n\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 50a Control panel, ready to be mounted on the wall and plug in.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003eEach panel features an interlocking relay, for safety from accidental power up of elements or dry pumping. When the e-stop or key switch are turned on, this relay reacts by either shutting off power to the pumps and elements (therefore appear dead) or it allows power to flow. Additionally, this relay works in conjunction with the e-stop switch, and therefore, protects the hardware even while still leaving you the ability to take corrective action on the still powered PIDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with weather proof engraved ID tagging\u003c\/li\u003e\n\u003cli\u003e50a, 240v electric, single phase (for safety, please use GFCI protection)\u003c\/li\u003e\n\u003cli\u003e50a Twist lock power in supply to plain wire end or 4 prong washer\/dryer plug, 6 ft wire\u003c\/li\u003e\n\u003cli\u003eElectric Brewing Supply 200 Series\u003cspan\u003e \u003c\/span\u003ePID Controllers,\u003cspan\u003e \u003c\/span\u003ewith matching \u003cspan\u003e200 Series PID Timer unit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 L6-30 Flanged outlets for 240v Elements upto 5500w configured in an either HLT or Boil only selection.\u003c\/li\u003e\n\u003cli\u003e2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March\u003c\/li\u003e\n\u003cli\u003e3 temperature probe inputs via XLR connection\u003c\/li\u003e\n\u003cli\u003e3 RTD temp probe cables, color coded.\u003c\/li\u003e\n\u003cli\u003e3 RTD 1.5\" long temperature probes with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eAvailable here\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e50a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps, we recommend pairing the L5-15 to 5-15 molded extension cord with your pumps to keep your warranty intact.  They can be found \u003ca href=\"http:\/\/www.ebrewsupply.com\/pump-jumper-6-l5-15p-to-5-15r\/\"\u003ehere\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eKettles to your liking\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOverall dimensions\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof control panel measure 20 inches wide, 22 inches tall, and approximately 9 inches deep. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4500w or 5500w element in protective enclosure to attach to kettle\u003c\/li\u003e\n\u003cli\u003e50a GFCI protected, single phase 240v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps with plugs changed to twist locking L5-15 plug.\u003c\/li\u003e\n\u003cli\u003eKettles to your liking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower requirements for electrics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou will need a NEMA 14-50 outlet on the wall for power.  The outlet should be protected by GFCI breaker for protection.  It is highly recommended for this control you use a 60a breaker with proper wiring (8 ga in areas where we've lived, 6 ga in some others). We highly recommend you consult and hire a electrician for this task.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e"}
50a PID Control Panel, 4 elements

50a PID Control Panel, 4 elements

Average lead is approx 2-4 weeks, during busier seasons this can stretch to 8. ** Updated design effective 10/15/2018. All new 20x20x8 Enclosure ** Hit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery. Electric Brewing Supply does ...


More Info
{"id":1615232827482,"title":"360 Series 4-element (2 max) 3v Control Panel, UL Listed","handle":"360-series-4-element-2-max-3v-control-panel-ul","description":"\u003cp\u003e Introducing the all new Electric Brewing Supply Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else. \u003c\/p\u003e\n\u003cp\u003eCentral control for all your brewery, no longer just your brew house.  Add central control to your fermentation control, with heat and cooling available for each fermentation vessel.  For the series, add valve control, or for those going out into the nano world, build an automated keg washer.\u003c\/p\u003e\n\u003cp\u003eIt's so much more then just a touch screen or just a web interface. It is in fact BOTH.  For the brewer who wants hands on in the brewery, we feature the 4\" Water tight (NEMA 4x for those curious) touch screen display. Giving you full access to all your brewery controls. The touch screen allows you to brew independent of any internet or network connection.\u003c\/p\u003e\n\u003cp\u003eWant the remote control and management of a connected device? With it's built in web interface, the reach extends beyond the control panel to any web browser you choose.  With an active scale design, the interface should work on most any web browser. (*Web ux is coming with next firmware release, slated first or second week of January)\u003c\/p\u003e\n\u003cp\u003eContinuing in our past foot steps, we went to our US suppliers and found a smoking awesome truly solid NEMA 4x Stainless steel enclosure to house everything made in Ohio.  Combined with the touch screen front from Indiana and internals from EU and China; all to give you a solid, reliable control panel.\u003c\/p\u003e\n\u003cp\u003eWith RTD Pt100 temperature input, no longer are you tied to proprietary or difficult to source temperature probes; pick your favorite RTD probes from our catalog and fit them into your system to your liking.  The controller includes 3 probes of your choosing with our standard 12 ft silicon insulated temp cables.\u003c\/p\u003e\n\u003cp\u003eGrowing? Take this one with you, or check out our larger options based on the same control software.  Stop having to learn how to use multiple controllers and stick with one solid solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePower in via cable gland (cord nut) or conduit. Electrician installed. \u003c\/p\u003e\n\u003cp\u003ePeak power rating of 2x 5500w elements and 2x Chugger pumps*\u003c\/p\u003e\n\u003cp\u003eIndustry standard L6-30 twist lock plugs on the underside for your elements\u003c\/p\u003e\n\u003cp\u003eIndustry standard L5-15 twist lock plugs for your pumps\u003c\/p\u003e\n\u003cp\u003eOur standard 3-pin XLR temp probe connections \u003c\/p\u003e\n\u003cp\u003eCat6 connectivity to your local network or network extender\u003c\/p\u003e\n\u003cp\u003eCat6 expansion port of valve controller and other future releases\u003c\/p\u003e\n\u003cp\u003eEnclosure is 304 Stainless steel, 500mm x 500mm x 210mm\u003c\/p\u003e\n\u003cp\u003eAssembled and Tested in Chassell, Michigan, USA\u003c\/p\u003e\n\u003cp\u003eIndividual\u003cstrong\u003e UL\/cUL Listed\u003c\/strong\u003e for home and commercial use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTypical lead time is 1-2 weeks depending on the time of year and back log.\u003c\/p\u003e","published_at":"2019-01-01T12:01:21-05:00","created_at":"2019-01-01T12:01:21-05:00","vendor":"Electric Brewing Supply","type":"360 Series","tags":[],"price":290000,"price_min":290000,"price_max":290000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15896298750042,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"360-0542-ul","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"360 Series 4-element (2 max) 3v Control Panel, UL Listed","public_title":null,"options":["Default Title"],"price":290000,"weight":29484,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/360_df_4e_comp_2caba23d-f380-4519-bd81-d94b874dfe93.jpg?v=1549982223"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/360_df_4e_comp_2caba23d-f380-4519-bd81-d94b874dfe93.jpg?v=1549982223","options":["Title"],"content":"\u003cp\u003e Introducing the all new Electric Brewing Supply Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else. \u003c\/p\u003e\n\u003cp\u003eCentral control for all your brewery, no longer just your brew house.  Add central control to your fermentation control, with heat and cooling available for each fermentation vessel.  For the series, add valve control, or for those going out into the nano world, build an automated keg washer.\u003c\/p\u003e\n\u003cp\u003eIt's so much more then just a touch screen or just a web interface. It is in fact BOTH.  For the brewer who wants hands on in the brewery, we feature the 4\" Water tight (NEMA 4x for those curious) touch screen display. Giving you full access to all your brewery controls. The touch screen allows you to brew independent of any internet or network connection.\u003c\/p\u003e\n\u003cp\u003eWant the remote control and management of a connected device? With it's built in web interface, the reach extends beyond the control panel to any web browser you choose.  With an active scale design, the interface should work on most any web browser. (*Web ux is coming with next firmware release, slated first or second week of January)\u003c\/p\u003e\n\u003cp\u003eContinuing in our past foot steps, we went to our US suppliers and found a smoking awesome truly solid NEMA 4x Stainless steel enclosure to house everything made in Ohio.  Combined with the touch screen front from Indiana and internals from EU and China; all to give you a solid, reliable control panel.\u003c\/p\u003e\n\u003cp\u003eWith RTD Pt100 temperature input, no longer are you tied to proprietary or difficult to source temperature probes; pick your favorite RTD probes from our catalog and fit them into your system to your liking.  The controller includes 3 probes of your choosing with our standard 12 ft silicon insulated temp cables.\u003c\/p\u003e\n\u003cp\u003eGrowing? Take this one with you, or check out our larger options based on the same control software.  Stop having to learn how to use multiple controllers and stick with one solid solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePower in via cable gland (cord nut) or conduit. Electrician installed. \u003c\/p\u003e\n\u003cp\u003ePeak power rating of 2x 5500w elements and 2x Chugger pumps*\u003c\/p\u003e\n\u003cp\u003eIndustry standard L6-30 twist lock plugs on the underside for your elements\u003c\/p\u003e\n\u003cp\u003eIndustry standard L5-15 twist lock plugs for your pumps\u003c\/p\u003e\n\u003cp\u003eOur standard 3-pin XLR temp probe connections \u003c\/p\u003e\n\u003cp\u003eCat6 connectivity to your local network or network extender\u003c\/p\u003e\n\u003cp\u003eCat6 expansion port of valve controller and other future releases\u003c\/p\u003e\n\u003cp\u003eEnclosure is 304 Stainless steel, 500mm x 500mm x 210mm\u003c\/p\u003e\n\u003cp\u003eAssembled and Tested in Chassell, Michigan, USA\u003c\/p\u003e\n\u003cp\u003eIndividual\u003cstrong\u003e UL\/cUL Listed\u003c\/strong\u003e for home and commercial use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTypical lead time is 1-2 weeks depending on the time of year and back log.\u003c\/p\u003e"}
360 Series 4-element (2 max) 3v Control Panel, UL Listed

360 Series 4-element (2 max) 3v Control Panel, UL Listed

 Introducing the all new Electric Brewing Supply Touch Screen brewery control solution, the 360 Series.  The only product available combining commercial grade designs and parts to bring you a home brewing experience unlike anyone else.  Central control for all your brewery, no longer just your brew house.  Add central control to your fermentatio...


More Info
{"id":11885073935,"title":"Gas PID Control Panel, 3 gas","handle":"gas-pid-control-panel-2-3-gas","description":"\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eDue to the custom nature of these,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003edelivery will vary\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eAlways subject to prior orders.\u003c\/h4\u003e\n\u003ch4\u003eAverage lead is approx 2-4 weeks, during busier seasons this can stretch to 8.\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 50a Control panel, ready to be mounted on the wall and plugged in.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003eEach panel features an interlocking relay, for safety from accidental power up of elements or dry pumping. When the e-stop or key switch are turned on, this relay reacts by either shutting off power to the pumps and elements (therefore appear dead) or it allows power to flow. Additionally, this relay works in conjunction with the e-stop switch, and therefore, protects the hardware even while still leaving you the ability to take corrective action on the still powered PIDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black\/white tags\u003c\/li\u003e\n\u003cli\u003e15a, 120v electric, single phase (for safety, please use GFCI protection)\u003c\/li\u003e\n\u003cli\u003ePowerCon Twist lock power in supply to standard 5-15 wall plug\u003c\/li\u003e\n\u003cli\u003eElectric Brewing Supply 200 Series\u003cspan\u003e \u003c\/span\u003ePID Controllers,\u003cspan\u003e \u003c\/span\u003ewith matching \u003cspan\u003e200 Series PID Timer unit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e2\/3 Power Con outputs for Gas valve output via 24vac, 24vdc, or 110v.  Specify voltage at time of order.\u003c\/li\u003e\n\u003cli\u003e2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March, plugs included with panel\u003c\/li\u003e\n\u003cli\u003e3 temperature probe inputs via XLR connection\u003c\/li\u003e\n\u003cli\u003e3 RTD temp probe cables, with shielding and black poly sleeving. Color coded heat shrink.\u003c\/li\u003e\n\u003cli\u003e3 RTD 1.5\" long temperature probes with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesired gas valves and sjoow wire\/cable\u003c\/li\u003e\n\u003cli\u003e15\/20a GFCI protected, single phase 120v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps with plugs changed to twist locking L5-15 plug. Plugs are provided in package (jumper cable recommended to avoid voiding warranty)\u003c\/li\u003e\n\u003cli\u003eKettles to your liking\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e","published_at":"2017-08-21T20:36:22-04:00","created_at":"2017-08-21T20:36:23-04:00","vendor":"Electric Brewing Supply Products","type":"Turn Key Setups","tags":["Gas Fired Systems"],"price":135000,"price_min":135000,"price_max":138000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48557545615,"title":"NPT Probe \/ NPT Probe \/ NPT Probe","option1":"NPT Probe","option2":"NPT Probe","option3":"NPT Probe","sku":"ebs12590-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gas PID Control Panel, 3 gas - NPT Probe \/ NPT Probe \/ NPT Probe","public_title":"NPT Probe \/ NPT Probe \/ NPT Probe","options":["NPT Probe","NPT Probe","NPT Probe"],"price":135000,"weight":18144,"compare_at_price":null,"inventory_quantity":-5,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557545679,"title":"NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","option1":"NPT Probe","option2":"NPT Probe","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"ebs12590-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gas PID Control Panel, 3 gas - NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"NPT Probe \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","options":["NPT Probe","NPT Probe","1.5 Tri-Clamp Probe (add $10)"],"price":136000,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557545743,"title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","option1":"NPT Probe","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"NPT Probe","sku":"ebs12590-03","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gas PID Control Panel, 3 gas - NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","public_title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","options":["NPT Probe","1.5 Tri-Clamp Probe (add $10)","NPT Probe"],"price":136000,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557545807,"title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","option1":"NPT Probe","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"ebs12590-04","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gas PID Control Panel, 3 gas - NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"NPT Probe \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","options":["NPT Probe","1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)"],"price":137000,"weight":18144,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557545871,"title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"NPT Probe","option3":"NPT Probe","sku":"ebs12590-05","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gas PID Control Panel, 3 gas - 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","public_title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ NPT Probe","options":["1.5 Tri-Clamp Probe (add $10)","NPT Probe","NPT Probe"],"price":136000,"weight":18144,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557545935,"title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"NPT Probe","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"ebs12590-06","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gas PID Control Panel, 3 gas - 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10) \/ NPT Probe \/ 1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)","NPT Probe","1.5 Tri-Clamp Probe (add $10)"],"price":137000,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557545999,"title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"NPT Probe","sku":"ebs12590-07","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gas PID Control Panel, 3 gas - 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","public_title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ NPT Probe","options":["1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)","NPT Probe"],"price":137000,"weight":18144,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":48557546063,"title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","option1":"1.5 Tri-Clamp Probe (add $10)","option2":"1.5 Tri-Clamp Probe (add $10)","option3":"1.5 Tri-Clamp Probe (add $10)","sku":"ebs12590-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Gas PID Control Panel, 3 gas - 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","public_title":"1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10) \/ 1.5 Tri-Clamp Probe (add $10)","options":["1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)","1.5 Tri-Clamp Probe (add $10)"],"price":138000,"weight":18144,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/pid_gas_b64b7f0e-8e24-4f75-8058-d43d979b8aeb.jpg?v=1557346114"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/8196\/products\/pid_gas_b64b7f0e-8e24-4f75-8058-d43d979b8aeb.jpg?v=1557346114","options":["HLT Probe","Mash Probe","Boil Probe"],"content":"\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eDue to the custom nature of these,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003edelivery will vary\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eAlways subject to prior orders.\u003c\/h4\u003e\n\u003ch4\u003eAverage lead is approx 2-4 weeks, during busier seasons this can stretch to 8.\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery.\u003c\/p\u003e\n\u003cp\u003eElectric Brewing Supply does the work so you don't have to. Featuring a fully configured 50a Control panel, ready to be mounted on the wall and plugged in.\u003c\/p\u003e\n\u003cp\u003eHave a problem? Wort pumping all over the floor? Forgot a hose? The red mushroom stop button halts all functions, without cutting your brew day short.\u003c\/p\u003e\n\u003cp\u003eEach panel features an interlocking relay, for safety from accidental power up of elements or dry pumping. When the e-stop or key switch are turned on, this relay reacts by either shutting off power to the pumps and elements (therefore appear dead) or it allows power to flow. Additionally, this relay works in conjunction with the e-stop switch, and therefore, protects the hardware even while still leaving you the ability to take corrective action on the still powered PIDs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel enclosure with ID tagging via Engraving for easy clean up of door. Underside is tagged using black\/white tags\u003c\/li\u003e\n\u003cli\u003e15a, 120v electric, single phase (for safety, please use GFCI protection)\u003c\/li\u003e\n\u003cli\u003ePowerCon Twist lock power in supply to standard 5-15 wall plug\u003c\/li\u003e\n\u003cli\u003eElectric Brewing Supply 200 Series\u003cspan\u003e \u003c\/span\u003ePID Controllers,\u003cspan\u003e \u003c\/span\u003ewith matching \u003cspan\u003e200 Series PID Timer unit\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e2\/3 Power Con outputs for Gas valve output via 24vac, 24vdc, or 110v.  Specify voltage at time of order.\u003c\/li\u003e\n\u003cli\u003e2 L5-15 Flanged outlets for 120v for pumps such as Chugger or March, plugs included with panel\u003c\/li\u003e\n\u003cli\u003e3 temperature probe inputs via XLR connection\u003c\/li\u003e\n\u003cli\u003e3 RTD temp probe cables, with shielding and black poly sleeving. Color coded heat shrink.\u003c\/li\u003e\n\u003cli\u003e3 RTD 1.5\" long temperature probes with Stainless steel 1\/2\" NPT washer and locknuts for weldless mounting or in plumbing mounting\u003c\/li\u003e\n\u003cli\u003eKey style power switch for secure storage\u003c\/li\u003e\n\u003cli\u003eLocking mushroom button stops all power to elements and pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat will you need aside from the panel to get going:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesired gas valves and sjoow wire\/cable\u003c\/li\u003e\n\u003cli\u003e15\/20a GFCI protected, single phase 120v electric service to brew area. Electrician installed highly recommended.\u003c\/li\u003e\n\u003cli\u003e1-2 Pumps with plugs changed to twist locking L5-15 plug. Plugs are provided in package (jumper cable recommended to avoid voiding warranty)\u003c\/li\u003e\n\u003cli\u003eKettles to your liking\u003c\/li\u003e\n\u003cli\u003eOnce you have your panel in place, it is highly recommended that you run auto-tune to improve your brewing performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e"}
Gas PID Control Panel, 3 gas

Gas PID Control Panel, 3 gas

Hit the ground running with one of our complete control panels. Save your time and energy, and let Electric Brewing Supply help you get a jump on your electric brewery. Due to the custom nature of these, delivery will vary Always subject to prior orders. Average lead is approx 2-4 weeks, during busier seasons this can stretch to 8. Hit the grou...


More Info